Operation of different talkgroups and talkpaths similar to trunking is possible, as is wide-area operation through IP connectivity. A single 12.5 kHz channel is able to carry two simultaneous and independent conversations, or simultaneous and independent voice and data paths each with 6.25 kHz equivalency, however the bandwidth of DMR exceedes the maximum required for UHF 6.25 kHz channel centers. The format is based on, and compatible with the European 2-slot DMR standard and uses Time Division Multiple Access ( TDMA) to effectively accommodate two simultaneous users.

MOTOTRBO is a Motorola digital radio product marketed primarily to business/industrial users. 1.5 MOTOTRBO Portable/Mobile Radios and Repeaters.

You CAN just leave a single TG and assign it to each channel as long as each channel is a different frequency/color code and/or time slot. Create your talk groups and ID's:Ĭreate your four channels and in the CONTACTS drop down, select each of the above and assign it to the channel. It is useful for always making sure you're monitor a specific channel regardless of the selected channel. It is always on unless you select a FLEXIBLE RECEIVE LIST at which point you can turn it on and off. You add the additional talk groups that you want to hear besides the selected talk group. RX GROUP is like a scan list for trunking systems. You DO NOT need a RX Group List unless you are you are using one of the trunking systems. Unless I missed it, I did not see if you are using simplex, conventional digital repeater, IPSC, or Capacity Plus. Unless I missed it, I did not see if you are using digital or analog. Hopefully I have described my situation clearly, and I can provide more information once I receive my programming cable and I can read a radio. Will I select Zone 2 on the radio when needing to use Channel 17 or is there a way to have all channels accessible? Receiving: RX Group Lists > Digital > List2 (Group List)Īnother question: Since each zone only allows 16 channels, for the 17th channel will I need a 2nd zone? I have 16 digital channels and 1 analogue channel. Receiving: Contacts > Digital > Call2 (Contact) Shipping: RX Group Lists > Digital > List1 (Group List) Shipping: Contacts > Digital > Call1 (Contact) To program this radio to work, do I need to create and assign a contact and a group list for each channel I create? For example, will I have 17 channels, each with a known department and frequency (Let's call them Shipping, Receiving, Production, Assembly, etc.), and an individual contact and an individual group list? I am programming my XPR3500e for my work frequencies I'm very new to CPS and radio programming, but I want to learn. Commercial, Professional Radio and Personal Radio.We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. The benefit is you do not need multiple versions for each radio (unlike Motorola). The conventional package is more reasonable though is still several hundred dollars. The trunked package is in upwards of $2,500. One package is for conventional programming and the other for trunked programming. Often the Kenwood software is less than $100 so don't be a cheapskate just purchase it.įor M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. Typically each series or individual radio requires its own software package. Please use Google or some other search engine to find a dealer that sells the software. The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). To obtain Motorola software see the Sticky in the Motorola forum.

It is YOUR responsibility to properly word your request. We do not want any hurt feelings when your vague post is mistaken for a free request. If you are having trouble legally obtaining software please state so. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. The same goes for any private transaction via Private Message.

Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. All requests will be deleted and a forum infraction issued. Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. To anyone looking to acquire commercial radio programming software:

Xpr flashcode decoder